Velleman VMB1TSW User Manual download pdf (Page 22)

The passage automatically 3° cooler than the office

When the sensor module in the office is set to day-mode, the temperature in the passage must be 3° lower than the

office. Is the day temperature of the office is set to 20°C the desired passage temperature will be 17°C.

When the sensor module in the office is set to night-mode, the temperature in the passage must be 3° lower than the

office. Is the night temperature of the office is set to 15°C the desired passage temperature will be 12°C.

Configuration:

The way to configure the system is to use the Velbus link program via a PC connected on the Velbus PC interface

(VMB1USB, VMB1RS of VMBRSUSB).

The configuration is now finished and the differential thermostat is enabled.

Remarks:

 Make sure both sensors are in heating mode (frost flower LED on the sensor is off).

 The passage temperature can never be higher than the preferred setting of its selected mode (anti-freeze, night,

day or comfort).

Office

Passage

1 2 ... 17 18 19 20 21 22 23 24

No comments

Velleman VMB1TSW User Manual Page 22