Velleman VDPLDJBAR4 User Manual download pdf (Page 4)

VDPLDJBAR4

10.01.2011 ©Velleman nv

• Lighting effects are not designed for permanent operation: regular operation breaks will prolong their

lives.

• Use the original packaging if the device is to be transported.

• Keep this manual for future reference.

4. Features

• 4 LED Moonflower bar ready to use

• DMX controlled via 6 channels with built-in programs and sound activation

• individual control for RGBW LED to create different coloured light beams

• adjustable strobe function via DMX

• sound control via built-in microphone

• mounting hole compatible with most common standard tripods

• protection bag included

5. Overview

Refer to the illustrations on page 2 of this manual.

1 microphone 4 DMX output

2 display with control buttons 5 sound sensitivity knob

A MODE button 6 foot controller jack

B DOWN button 7 power input

C UP button 8 stand mounting hole + knob

3 DMX input 9 spot DIP switch (4x)

6. Getting started

Choosing a Mounting Location

The VDPLDJBAR4 batten has been designed for indoor environments at temperatures up to

35°C. For proper operation, the unit must be operated with an unobstructed air convection to its

metal housing.

Do not:

• Operate the batten in environments with an ambient temperature higher than 35°C and a relative

humidity higher than 75%.

• Operate the batten in a closed environment smaller than 10 m³ unless forced air convection is

provided.

Secure Mounting

Risk of injury. Overhead mounting requires extensive experience: calculating workload limits,

determining the installation material to be used… Have the material and the device itself checked

regularly. Do not attempt to install the device yourself if you lack these qualifications as

improper installation may result in injuries.

• The VDPLDJBAR4 batten is designed to be mounted on a tripod with a 35 mm tube diameter. Make

sure that the diameter of the inserted tripod tube is not less than 35 mm as otherwise secure

mounting cannot be guaranteed. Slide the VDPLDJBAR4 over a suitable tripod (not incl.) and secure

it tightly by turning the knob [8] clockwise.

• Have the batten installed by a qualified person, respecting EN 60598-2-17 and all other applicable

norms.

• The carrying construction must be able to support 10 times the weight of the batten for 1 hour

without deforming.

• The installation must always be secured with a secondary attachment e.g. a safety cable.

• Never stand directly below the batten when it is being mounted, removed or serviced. Have a

qualified technician check the batten once a year and once before you bring it into service.

• Install the batten in a location with few passers-by that is inaccessible to unauthorised persons.

• Adjust the desired inclination angle via the mounting bracket and tighten the bracket screws.

• Make sure there is no flammable material within a 0.5 m radius of the batten.

• Have a qualified electrician carry out the electric connection.

• Connect the batten to the mains with the power plug. Make sure the used mains circuit is protected

by a 30mA Residual Current Device (RCD). Do not connect it to a dimming pack.

• The installation has to be approved by an expert before the device is taken into service.

DMX-512 connection

Refer to the illustrations on page 2 of this manual.

• When applicable, connect an XLR cable to the female 3-pin XLR output of a controller (not incl.) and

the other side to the male 3-pin XLR input [3] of the VDPLDJBAR4. Multiple VDPLDJBAR4’s can be

linked through serial linking. The linking cable should be a dual core, screened cable with XLR input

and output connectors.

1 2 3 4 5 6 7 8 9 ... 26 27

Comments to this Manuals

No comments

Velleman VDPLDJBAR4 User Manual Page 4

Comments to this Manuals

Related products and manuals for Lighting Velleman VDPLDJBAR4