Velleman VDPLOF1203RGB User Manual download pdf (Page 4)

VDPLOF1203RGB HQPOWER™

Address Setting: 002

1. Press the S button; the red LEDs are on: you can start to set the address.

2. Press numeric button #0; the green LEDs are on: 0 (hundreds) setting successful.

3. Press numeric button #0; the blue LEDs are on: 0 (tens) setting successful.

4. Press numeric button #2; all the LEDs are on: complete setting successful.

Detailed DMX Values per Channel

Channel Function From To Description

1 Red 0 255 From 0 – 100 %

2 Green 0 255 From 0 – 100 %

3 Blue 0 255 From 0 – 100 %

4 Dimmer 0 255 From 0 – 100 %

5 Shutter

0 10 Closed

11 255 S>F strobe

DMX512 Connection

Connect the provided XLR cable to the female 3-pin XLR output of your controller and the other side

to the male 3-pin XLR input of the VDPLOF1203RGB. Multiple VDPLOF1203RGBs can be linked

through serial linking. The linking cable should be a two-core screened cable with XLR input and

output connectors.

DMX512 Chain with Termination

A DMX terminator is recommended for installations where the DMX cable has

to run a long distance or is in an electrically noisy environment (e.g. discos).

The terminator prevents corruption of the digital control signal by electrical

noise. The DMX terminator is simply an XLR plug with a 120 Ω resistor

between pins 2 and 3, which is then plugged into the XLR output socket of

the last device in the chain.

Please see illustrations.

DMX Start Address Setting

All DMX-controlled devices need a digital start address so that the correct device responds to the

signals. This start address is the channel number from which the device starts to “listen” to the DMX

controller. Enter the correct number and read it from the display located on the base of the

VDPLOF1203RGB.

You can use the same starting address for a whole group of devices or enter an individual one for

every device. When all devices have the same address, all the VDPLOF1203RGBs will “listen” to

the control signal on one particular channel. In other words: changing the settings of one channel

will affect all devices simultaneously. If you set different addresses, each device will “listen” to a

separate channel number. Changing the settings of one channel will only affect the device in

question. In the case of the 5-channel VDPLOF1203RGB, you will have to set the start address of

the first VDPLOF1203RGB to 1, the second VDPLOF1203RGB to 6 (1 + 5), the third to 13 (6 + 5)

and so on.

7. Cleaning and Maintenance

1. All screws should be tightened and free of corrosion.

2. The housing, visible parts, mounting supports and the installation location (e.g. ceiling,

suspension, trussing) should not be deformed, modified or tampered with e.g. do not drill extra

holes in mounting supports, do not change the location of the connections.

3. Moving mechanic parts must not show any signs of wear and tear.

4. The electric power supply cables must not show any damage. Have a qualified technician

maintain the device.

5. Disconnect the device from the mains prior to maintenance activities.

6. Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.

7. There are no user-serviceable parts.

8. Contact your dealer for spare parts if necessary.

1 2 3 4 5 6 7 8 9 ... 22 23

Comments to this Manuals

No comments

Velleman VDPLOF1203RGB User Manual Page 4

Comments to this Manuals

Related products and manuals for Lighting Velleman VDPLOF1203RGB