Velleman ALN011 User Manual download pdf (Page 14)

ENGLISH

How to operate with your ALAN 42 MULTI

1. Insert the antenna in the antenna connector.

2. Insert 6 alkaline batteries into the battery compartment, noting polarity (the alkaline

batteries are not rechargeable)

3. Rotate the ON/OFF volume control clockwise to turn the unit on. Adjust the volume

for a normal listening level.

4. Adjust the SQUELCH control

5. Select the desired channel by the UP/DOWN or QUICK UP/QUICK/DOWN

buttons

Note: if the channel does not change,control that the EMG or LOCK button has

not been pressed. In this case, press the EMG or LOCK button to deactivate

this function.

As far as the other functions are concerned, refer to previous instructions.

To transmit: press and hold the PTT button, then talk to the microphone.

To receive: simply release the PTT button.

CAUTION: DON’T EXPOSE THE DISPLAY TO EXTREME TEMPERATURES.

FREQUENCY BAND SELECTION

The frequency bands must be chosen according to the country you are in.

Procedure:

1. Switch off the unit.

2. Turn it on while pushing the “A/F-LCR” and “SC” buttons.

3. By pushing the ▲ e ▼ buttons, select the desired frequency band (see the chart

here below).

4. To ﬁx your selection, press the “A/F-LCR” button.

NOTE: If you select a frequency band which operates in FM mode only, the “A/F-

LCR” control activates the LCR function (Last Channel Recall).

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 60 61

No comments

Velleman ALN011 User Manual Page 14