Velleman VM191 User Manual download pdf

HOW TO SETUP YOUR REMOTE CONTROL:

Your VM191 remote can control a wide range of Velleman devices.

At the factory, it has been set-up to control the K8095/VM8095 MP3 player. If you want to control these

devices, you can skip the setup procedure. For all other supported devices, please follow the proce-

dures below:

Setup procedure:

In order to be able to use the VM191 remote control with your device, the remote and/or your device

must be conﬁ gured in the correct way. First, remove the 3 screws at the back of the remote and open

the unit. Next, select your device from the list below and follow the appropriate setup procedure.

Note: The devices listed below are supported at time of printing.

Please check www.velleman.be for an up to date list, as devices might have been added.

1) For use with K8095/VM8095 MP3 player

• Press and hold ‘Mode’-button

• Press and hold button ‘1’ until the led ﬂ ashes

• Release both buttons.

• Close the remote by means of the 3 screws

• You device is ready to be used

2) For use with the K8050/VM122 15-channel IR receiver

• Turn on your K8050/VM122 unit

• Press and hold ‘Mode’-button

• Press and hold button ‘4’. The led will ﬂ ash brieﬂ y every 3s.

Watch the K8050/VM122 channel leds closely.

• As soon as the channel led of the channel you wish to control with button ‘1’ lights, release

both buttons. The 3 following channels are controlled with button 2, 3 and 4. This procedure

can take a couple of minutes, depending on the address setting of the K8050/VM122.

• Close the remote by means of the 3 screws

• You device is ready to be used

3) For use with the MK161

• Press and hold ‘Mode’-button

• Press and hold button ‘4’. The led will ﬂ ash brieﬂ y every 3s. Everytime it ﬂ ashes,

a different code is generated. You can release both buttons at anytime.

• Now you can ‘learn’ the generated code to the MK161

(please check MK161 manual for how-to instructions).

• Close the remote by means of the 3 screws

• You device is ready to be used

4) For use with the VM192 RGB controller with IR receiver

• Press and hold ‘Mode’-button

• Press and hold button ‘4’ until the led ﬂ ashes

• Release both buttons.

• Close the remote by means of the 3 screws

• You device is ready to be used

USE:

Table below indicates button assignment for the different applications:

Application button1 button2 button3 button4

K8095/VM8095 vol up vol down next previous

K8050/VM122 CH x CH x+1 CH x+2 CH x+3

MK161 CH1 CH2 - -

VM192

not available at time of printing.

Please check www.velleman.be

LED

Mode

button

 

1 2

Setup procedure: 1

Summary of Contents

Page 1 - Setup procedure:

HOW TO SETUP YOUR REMOTE CONTROL:Your VM191 remote can control a wide range of Velleman devices.At the factory, it has been set-up to control the K809

Page 2

HOW TO SETUP YOUR REMOTE CONTROL:Your VM191 remote can control a wide range of Velleman devices.At the factory, it has been set-up to control the K809

Comments to this Manuals

No comments

Velleman VM191 User Manual

Browse online or download User Manual for Hardware Velleman VM191. Velleman VM191 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Hardware Velleman VM191