Velleman ALN011 User Manual download pdf (Page 13)

ENGLISH

To activate this function, operate as follows:

- Select the desired channel through the channel selector

- Press the DW button

- Select the second channel

- Press the button DW again

- To cancel the function press again the DW button or the PTT button.

16. SCAN button: with this control, you can automatically seek for a busy channel.

• Turn the Squelch clockwise until the background noise is no longer heard.

• Press the ''SCAN'' button: the transceiver will scan automatically all the

channels until a carrier is being received.

• When it ﬁnds the carrier, it stops and starts again some seconds after the end

of the communication on the channel.

• When the radio is transmitting, the scan function is deactivated.

17. ✩ button: display lighting (temporized).This function allows to operate in darkness

conditions. By pressing this button, the display is lighted for 5 seconds.

18. Push to talk button (PTT): Its pressure activates the transmission. When it is

released, the receiver is activated.

19. Battery compartment: insert 6 Ni-Cd alkaline batteries.

20. Hole for wrist belt

21. Channel UP: to skip to the next channel. Keeping this button pressed, the

“autorepeat” function is obtained.

22. Channel DOWN: to skip to the previous channel. Keeping this button pressed, the

“autorepeat” function is obtained.

23. Battery pack contact: lift the button and take the batteries out (see drawing).

24. Auxiliary antenna contact: for the connection to the vehicular adaptor.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 60 61

No comments

Velleman ALN011 User Manual Page 13