Velleman ALN006 User Manual download pdf (Page 18)

English

6.3 Keyboard tones

1) Press MENU to highlight bP (bip).

2) Press p or q to enable or disable the keyboard tones.

3) Press PTTtoconrm.

2When you press one of the keys to disable the keyboard tones

(oF) in step 2, the radio will not issue a beep to conrm the

disabling. The re-enabling of the tones (on) is instead signaled

with a beep.

6.4 Selecting the call tone

BrieypressCALL to startanaudio call.To select oneofthe ve

available tones:

1) Press MENU eight times. CA (CALL) displays on the left along

with the currently set value: oF (disabled) or 1, 2, 3, 4 or 5,

according to the tone in use.

2) Press p or q to select the desired setting. You can listen to the

tone you are setting through the speaker.

3) Press PTT to exit.

2If you select oF (Disabled), the call function shall be disabled.

Thus, the selection of CALL shall produce no effect.

6.5 Scrambler

The scrambler is designed to protect communications.

This feature prevents parties from other networks from hearing and

understanding voice communications.

To enable/disable the scrambler:

1) Press MENU nine times. SC (Scrambler)

2) Press p or q to enable/disable the scrambler.

3) Press PTT.

If the scrambler is enabled, the status LED ashes in green (two

repeatedashesingreen).

2When the scrambler is enabled, it is not possible to clearly receive

communications. Therefore, before enabling it, it is necessary to

make sure that all the radios you wish to communicate with have

enabled this feature, otherwise you will not be able to communicate

with them.

2The scrambler of the transceiver does not fully guarantee the

safety of communications.

6.6 Out of range indicator

If this feature is enabled, the HP450 2A will issue a double beep

when the radio is out of range.

I The radio with which you are communicating must also

enable this feature.

To enable/disable the out of range indicator:

1) Ask the other radio to enable the feature.

2) Press MENU till oU (Out of range) is displayed.

3) Press p or q to enable or disable this feature.

4) Press PTT(orwaitveseconds).

6.7 Cloning (copying data between radios)

The Cloning feature enables to copy all the settings (for example

channels, CTCSS/DCS, call tones, enabled/disabled features) onto

one or more HP450 2A radios.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 24 25 26

Comments to this Manuals

No comments

Velleman ALN006 User Manual Page 18

Comments to this Manuals

Related products and manuals for Walkie Talkies Velleman ALN006