Velleman ALN006 User Manual download pdf (Page 16)

English

5.11 Selecting the transmission power

The HI/LO button is disabled in the PMR446 band.

In the PMR version, you can select the high or low power (1/5W).

The transmission power is displayed with the icon

at the top left

of the screen.

5.12 Emergency mode

The E button is disabled in the PMR446 band.

In Emergency mode, the only channel displayed is the emergency

one;thepoweroutputishighlevel.

5.13 Scan function

5.13.a Locking the keyboard

Hold down SCAN/LOCK for approximately three seconds to highlight

symbol

(in the lower left section of the screen). All the functions of

the radio are temporarily disabled, except transmission (PTT), calls

(CALL) and the features for the adjustment of the squelch/monitor.

To release the keyboard, repeat the operation described. Symbol

disappears from the display.

2If the radio is in Scan or Dual Watch mode and you press SCAN/

LOCK, these features are disabled without the keyboard being

locked. To perform the latter operation, it is therefore necessary

to press the key once more.

5.13.b Channel scanning

This function is useful to keep a check on the channels previously

programmed by the programming software or by on authorised

dealer.

TostartthescanbrieypressSCAN/LOCK. SCAN displays.

During the scan you can also:

• ReplytoacallbypressingPTT.

To disable the scan, press once more SCAN/LOCK. SCAN disappears

from the display and the transceiver returns to the standby mode on

the channel that had been selected before starting the scan.

2If a priority channel has been programmed and you select it, P

displays in the lower left section of the screen.

I The channels to scan must be previously enabled through

the programming software or by an authorised dealer.

5.13.c Dual Watch (dual listening mode)

This function enables you to scan two selected channels only.

1) Select the desired operating channel.

2) Press MENU. DW(DualWatch)ashesonthedisplayalongwith

oF (Dual Watch disabled).

3) Press p or q to select the second channel.

4) Press PTT (or wait ve seconds) to enable the Dual Watch

feature.

DW displays in Dual Watch mode.

TodisabletheDualWatchfeature,brieypressSCAN/LOCK.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 25 26

Comments to this Manuals

No comments

Velleman ALN006 User Manual Page 16

Comments to this Manuals

Related products and manuals for Walkie Talkies Velleman ALN006