Velleman ESR70 User Manual download pdf (Page 10)

Atlas ESR User Guide February 2008 – Rev 4

Page 10

Care of your Atlas ESR

The Peak Atlas ESR should provide many years

of service if used in accordance with this user

guide. Care should be taken not to expose your unit

to excessive heat, shock or moisture. Additionally, the battery

should be replaced at least every 12 months to reduce the risk of leak

damage.

If a low battery warning message

appears, replacement of the battery is

essential.

Immediate replacement of the battery is EXTREMELY IMPORTANT as the

built-in protection mechanism may not function correctly if the battery

condition is poor and therefore render your unit susceptible to damage from

even low energy charged capacitors.

The Atlas ESR will not continue to operate if a low battery condition is

encountered.

New batteries can be purchased from many retailers and directly from Peak

Electronic Design Ltd or an authorised agent.

Battery types: Suitable battery types include 23A, V23A, GP23A, MN21 or a

good quality 12V alkaline equivalent as used in many test instruments and

automotive remote key fobs.

Battery access: To replace the battery, unscrew the three screws to remove the

rear panel. Remove the old battery and insert a new one, taking care to observe

the correct polarity. Carefully replace the rear panel, do not over-tighten the

screws.

Peak Safe Battery Disposal Scheme: Please return your old analyser battery to

Peak Electronic Design Ltd for safe and environmentally responsible disposal.

** Warning **

ery

1 2 ... 5 6 7 8 9 10 11 12 13 14

No comments

Velleman ESR70 User Manual Page 10