Velleman HAA2890 Installation Manual download pdf (Page 10)

REFRESH THE SYSTEM WITH THE “REFRESHING CODE” --- 9 9 9 9

The system can be refreshed to clear all the old data stored and back to its ex-factory default values.

IMPORTANT NOTE:

Make sure that you really want to clear ALL the OLD data before entering of the Refreshing Code. The keypad will be

back with its default values like a new unit. Re-program of the desired values are necessary.

REFRESHING CODE

The Code 9 9 9 9 is for refreshing of the system. Once it is keyed in and validated with #, all the values

programmed previously will be cleared EXCEPT the Master Code.

The refreshing takes around 2.5 minutes. During the keypad is being refreshed the Status LED (Amber) flashes fast

until the end.

THE DEFAULT VALUES OF THE KEYPAD

PROGRAMMING

LOCATION PARAMETERS DEFAULT FUNCTIONS & VALUES

0 1 Master Code 0 0 0 0 Factory Set, Not a default value *

0 2 Super User PINs Nil ----- User Program Required

0 3 Common User PIN 1 Nil ----- User Program Required

1 0 User PINs & Cards for O/P 1 Nil ----- User Program Required

4 0 Visitor Codes Nil ----- User Program Required

5 1 O/P Mode of The O/P 1 Time = 5 Sec, Momentary

6 0 Personal Safety & Lock-out Code = 1, 10 False Code/Card Lock-out 60 Sec

7 0 User Code Entry Mode Code = 2, Manual Entry Mode

7 1 Pacifier Tones ON-OFF Selection Code = 1, Pacifier Tone ON

7 2 O/P Operation Announcer Code = 1 Sec, Notification Beep ON

7 3 Status LED Standby Flashing ON-OFF Code = 1, Flashing Enabled

9 0 Egress Delay & Warning Code 1 = 0, Instant, No Delay

Code 2 = 1, Momentary Contact without Warning

9 4 Operation Modes Code = 0, Stand Alone Keypad

NOTE:

The DAP Code 8 0 8 0 and the Refreshing Code 9 9 9 9 are fixed in the operating system program. It can not be

changed in any ways or be influenced by the system in default setting.

REFRESHING CODE VALIDATION

9999 #

HAA2890_Manual.indd 20 24/05/2012 15:21:13

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 33 34

No comments

Velleman HAA2890 Installation Manual Page 10