Velleman HAA2890 Installation Manual download pdf (Page 11)

KEYPAD PROGRAMMING MAKE SIMPLE – For General Users

The HAA2890 has many functions for user’s selection. For those general users taking the keypad for door strike only,

most of the features can be kept in their Default values. Only the User PINs / Cards and a private Master Code are

necessary to program for the system.

The keypad accepts 1) Card only, 2) PIN only, 3) Card + PIN or 4) Card + Common User Code to operate its outputs.

PROGRAMMING

NOTE: Wait 1 minute until the end of the power up delay.

1) Set System into Programming Mode with The Factory Set Master Code 0 0 0 0

---- 2 beeps, system is in Programming Mode

Note: If the Master Code is forgotten, use the DAP Code to set the system into programming mode. See DAP CODE

8080 on the previous page for the details.

2) Change The Factory Set Master Code to Owner’s Private Master Code for Security Reason

---- 2 beeps, 3 2 8 9 is a Master Code for example here only

3289 is the new Master Code and the 0000 is erased

3) Record an “EM Card” to Operate The Output 1 for Door Open

(a)

(b) (c) (d)

(e)

(a) 10 = Programming Location for Output 1

(b) 1 = Programming option for EM Card only

(d) Read Card = Put the Card close to the card reader

(e) # = Confirm the card is read, 2 beeps

4) Set an “User PIN” to Operate The Output 1 for Door Open

(a)

(b) (c) (d) (e)

(a) 10 = Programming Location for Output 1

(b) 2 = Programming option for User PIN only

(d) 8321 = The User PIN that is programmed for door open. 8321 is an User PIN for example here only

(e) # = Confirm the User PIN, 2 beeps

5) Record an “EM Card + User PIN” to Operate The Output 1 for Door Open

003

6123

(a) (b) (c) (d) (e)

(f)

(a) 10 = Programming Location for Output 1

(b) 3 = Programming option for EM Card + User PIN. (The User PIN can be repeated use or proprietary)

(d) Read Card = Put the Card close to the card reader

(e) 6123 = The User PIN to be used with the EM Card. 6123 is an User PIN for example here only.

(f) # = Confirm the Card+PIN is stored, 2 beeps

0000

3289

002

8321

001

READ CARD

HAA2890_Manual.indd 23 24/05/2012 15:21:14

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 33 34

Comments to this Manuals

No comments

Velleman HAA2890 Installation Manual Page 11

Comments to this Manuals

Related products and manuals for Numeric keypads Velleman HAA2890